UCS

  • UCS horizontal centrifugal pump

     
    UCS are single-stage horizontal centrifugal pumps with conventional mechanical sealing system. Connected to the driving part by means of a spacer coupling (back pull-out version) and installed on a common baseplate, their design is fully compliant with standards DIN 24256 and ISO 2858. They can be manufactured from stainless steel or special alloys. Operating temperatures range from cryogenic to +200°C. UCS series pumps can mount various types of single, double or cartridge mechanical seals of the top domestic and international brands. Generously-sized shaft and bearings, closed, open or open vortex impeller with reduced overhang and tapered stuffing box with abrasion-resistant flow-regulating baffles make this series of Hi-Tech pumps ideally suited for the most demanding process services.
     
    These pumps are typically used in all industrial sectors for the transfer of liquids, in particular: corrosive liquids, slurry, liquids containing crystals, dirty liquids, effluents and chemical wastewater.
     

     
    Technical features

    Pump type Close-coupled centrifugal pump with mechanical seal
    Construction materials AISI 316L (standard) - Hastelloy-C (optional)
    Liquids handled Chemical, toxic or flammable liquids
    Performances Q max = 80 m3/h H=65m
    Motors Electrical from 0.75 kW to 30.0 kW
    Max temperature from -30 °C to +200 °C
    Pressure ratings allowed from PN10 to PN40
    Max viscosity 400 cSt max
    Pass solids Max concentration 5 % in weight
    Hardness 800 Vk
    Size max. 250 µm
     
    Hydraulic performances
     
    Dimensions
    UCS bare shaft dimensions
     
 

toptop