CVN

  • CVN vertical centrifugal pump

     
    CVN are vertical-shaft centrifugal pumps built from PP or PVDF thermoplastic material (parts in contact with the process liquid). They are installed on a metal baseplate with protective coating on the tank side and connected to the driving part by means of a flexible coupling. Depending on the length requested, they are fitted with between one and three shaft supports. The supports consist of extremely reliable and hard-wearing separately-flushed friction bearings. CVN pumps are available in the standard versions with lip-seal system or liquid seal to prevent the outflow of rising vapours and gases.
     
    These pumps are typically used in all industrial sectors for the transfer of corrosive, toxic or hazardous liquids.
     

     
    Technical features

    Pump type Vertical-shaft centrifugal pump with motor on V1 frame
    Construction materials PP / PVDF
    Liquids handled Chemical, toxic or flammable liquids
    Performances Q max = 100 m3/h H=64mcl
    Motors Electrical from1 kW to 18.5 kW
    Max temperature PP: from °C to+30 °C
    PVDF: from °C to50 °C
    Rating di pressione ammessi PP: 1 Mpa (@ 20 °C)
    PVDF: 1 Mpa (@ 20 °C)
    Max viscosity 400 cSt max
    Pass solids Max concentration 5 % in weight
    Hardness 800 Vk
    Size max. 500 µm
     
    Hydraulic performances
     
     
    Dimensions
     
     
 

toptop