ETN-SP are self-priming magnetic driven centrifugal pumps in close-coupled execution. Ideal for safe installation priming from the top of vessels and/or tanks for transferring acids, solvents and corrosive liquids.

 

The pump has to be completely filled prior to priming; after the first priming, pump design grants that enough liquid remains in the casing for subsequent primings.

 

ETN SP exclusive design does not require any "Clapet" or non-return valve that may be subject to wear and deteriorate pump performances.

 

All non metallic wet-end components are injection moulded and/or machined from block material. The LF Graphite bush configuration, with its low friction coefficient, combined with CDR FTC exclusive balancing system of the internal magnet (Full Thrust Control), allows to withstand occasional dry running periods up to one hour.
On the other hand, the SiC version allows the use of this pumps with particularly aggressive and abrasive liquids.

 

The magnetic coupling with neodymium-iron-boron magnets insures a sealless, zero-leakage pumping solution.

 

The closed-coupled execution makes the ETN SP pump very compact, silent and safe.

 

 

Technical specifications

Materials	PP / PVC-CAW
Flow rate	max 25 m3/h
Head	max 30 m
Electric motors	da 0.75 kW (gr.80) to 7.5 kW (gr.132)
Temperature range	from 0°C to +50°C
Allowable pressure rating	from 20°C - 9bar to 50°C - 7bar
Viscosity	---
Pass solids	Max concentration: 2% of weight Max hardness: 800 Vk Max particle size: 150ìm
Max suction lift	Up to -6 m