HPTUP SERIES 

 

 

Sunrise High-flow Polypropylene Cartridges (PUP), made of pleated polypropylene microfiber provide good performance of filtration. The specialities of high flow rate and high dirt holding capacity made it the optimum filtration solution for liquids and gases.

 

Type： Depth Filter Cartridge
Filter Media： Polypropylene
Temperature： Up to 70℃
Micron Ratings(um, nominal)：
0.1、0.22、0.45、1.0、3.0、5.0、10、20、25、30、50、70
Applications：
♦ Clarify filtration ♦ Electroplating ♦ Chemicals ♦ Food & Beverage

♦ Pharmaceuticals♦ Photographhic ♦ Fermentation broth preparations

♦ Biological Products
 

 

 

Sunrise HPUP filter cartridges construction combines depth filter technology with pleated filter technology, ensure high contaminant holding capacity and large filtration area. HPUP construction adopts depth filter technology of Graded pore-size, which extending HPUP’s contaminant holding capacity, avoiding filter surface jam. Graded pore-size distribution from coarse (upstream) to fine (downstream) can removal particles gradually, and extend filter's service life.

 

Type： Absolute Rated Filter Cartridge
Filter Media： Polypropylene
Temperature： Up to 70℃
Micron Ratings(um, nominal)：
0.5、0.1、1.5、3.0、5.0、10、15、20、40、70、90
Applications：
♦ CMP filtration ♦ Chemicals ♦ Food & Beverage ♦ Ink filtration

♦ Fermentation broth preparations
 

 

Sunrise HHPUP filter cartridge is well-suited by high density pleated membrane, which ensures double filtration area. Graded pore-size distribution from coarse (upstream) to fime (downstream) makes HHPUP has higher contaminant holding capacity and longer service life.

 

Type： Absolute Rated Filter Cartridge
Filter Media： Polypropylene
Temperature： Up to 70℃
Micron Ratings(um, nominal)：
0.6、1.2、2.5、4.5、6.0、10、20、40、70
Applications：

♦ GAS Filtration ♦ Chemicals ♦ Film ♦ Fiber ♦ Biological Products 

♦ Food & Beverage ♦ DI water ♦ Pharmaceuticals

 

 

Sunrise PEUP filter cartridges feature a unique single layer, asymmetric hydrophilic polyethersulphone membrane. This membrane is characterized by excellent throughput and higher durability in many applications such as pharmaceutical and biological filtration and beverage filtration. Higher flow-rates than any other sterilizing grade filter cartridge offers, so PEUP assures thereby most economic design of filtration systems.

 

Type： Pleated Membrane Filter Cartridge

Filter Media： Asymmetric polyethersulfone membrane

Temperature： Up to 90°C

0.22、0.45、0.65

♦ Electronic ♦ DI water ♦ Food & Beverage ♦ Medicine ♦ Biological products

♦ Photoresists ♦ Bottled water ♦ Process water

 

 

Sunrise Pleated Single-layered Polyethersulfone Membrane filter Cartridges (LPEUP) are specially designed to provide superior flow rates at an economical cost. The unique construction features a high particle removal efficiency. Hydrophilic polyethersulfone membrane cartridges require no prewetting and are ready to use. This assures a cost edfective device while maintaining excellent performance in the applications.

 

Type： Pleated Membrane Filter Cartridge

Filter Media： Polyethersulfone membrane

Temperature： Up to 90°C

0.1、0.22、0.45、0.65、0.8、1.2

♦ bottled water ♦ DI water ♦ Food & Beverage ♦ Medicine ♦ Biological products

♦ Pharmaceutical ♦ Process water

                                                                                                  回上層

 

Sunrise PTUP filter cartridges, manufactured with permanently hydrophobic PTFE membranes, provide the cleanest fluids at the highest flow rate with the lowest possible cost. Sunrise PTUP serves as a low-cost alternative applications and maintains broad chemical compatibility with low extractable levels and high particle retention rates.

 

Type： Pleated Membrane Filter Cartridge

Filter Media： Hydrophobic PTFE membrane

Temperature：Up to 90°C

0.05、0.1、0.22、0.45、1.0、5.0

♦ Electronic ♦ Acids ♦ Solvents ♦ Processwater ♦ Etchants ♦ Photoresists 

♦ Medicine ♦ Polymer Filtration

 

 

 

Sunrise Pleated Hydrophilic Polytetrafluoroethylene Membrane Filter Cartridges (HPTUP), allow for filter aggressive liquid without prewetting, and maintains broad chemical compatibility, HPTUP provide high particle retention efficiency and high flow rate.

 

Type： Pleated Membrane Filter Cartridge

Filter Media： Hydrophilic PTFE membrane

Temperature： Up to 90°C

0.1、0.22、0.45、1.0、3.0、5.0

♦ Electronic ♦ Acids ♦ Process water ♦ Etchants

 

 

 

Sunrise DPTUP filter cartridges, manufactured with hydrophobic PTFE membranes, are specially designed for the removal of micro-organisms and particles from air and gases. Due to their permanent hydrophobicty, DPTUP offer the highest process security, even with high volume gas streams, extreme humidity and stringent in-line steam sterilizations.

 

Type： Pleated Membrane Filter Cartridge

Filter Media： Hydrophobic PTFE membrane

Temperature：Up to 90°C

0.01

♦ Process Gases ♦ Tank Vents ♦ Sterile CO2 Filtration ♦ Compressed Air

♦ Bulk and Point-of-use Gases ♦ Microbial Control of inlet Air for Fermentations

 

Sunrise APTPV filter cartridges, utilizing PTFE membranes and PVDF core & cage, will meet the most critical filtration requirement in the most aggressive environments. PVDF hardware can provide efficiency filtration at an economical cost. Besides, PTFE membranes with ultra low binding properties are on your demanded.

 

Type： Teflon Filter Cartridge

Filter Media： PTFE membrane

Core/Cage/End Caps： PVDF

Support： ECTFE

Teperature： Up to 120°C

0.05、0.1、0.22、0.45、1.0、5.0

♦ Specially Chemicals ♦ Solvents ♦ Mixed acids ♦ Photographic ♦ Oxide Water

 

Sunrise APTEC filter cartridges, utilizing expanded PTFE membranes and ECTFE core & cage, will meet the most critical filtration requirement in the most aggressive environments. The advantage of APTEC is that the Halar PTFE remains robust and durable in highly corrosive acids, bases, and organic compounds. Besides, Hydrophile PTFE membranes is Non-dewetting before used.

 

Type： Pleated Membrane Filter Cartridge

Filter Media： PTFE membrane

Core/Cage/End Caps： Halar [ECTFE]

Temperature： Up to 160°C

0.05、0.1、0.22、0.45、1.0、5.0

♦ Specially Chemicals ♦ Solvents ♦ Mixed Acids ♦ Photographic ♦ Oxide Water

                                                                                                  回上層

 

Sunrise GUP filter cartridegs are made with positive Zeta modified glass microfiber media for enhanced efficiency. These filters have a high dirt holding capacity and exhibit exceptional flow performance compared to polypropylene filters, so designed for removal of contaminants like colloids, lipids, protein aggregates and particles from biopharmaceutical fluids.

 

Type： Pleated Filter Cartridge

Filter Media： PP prefilter + glass microfiber media

Temperature： Up to 70°C

1.0、3.0、5.0、10

♦ Fermentation broths ♦ Wine ♦ Serum ♦ Highly viscous opthalmic and LVP solutions

♦ All media containing lipids and colloidsas contaminants

 

Sunrise Pleated Nylon membranes filter cartridges (NUP) filter cartridges feature high-strength nylon membranes, the nylon membrane provide a excellent chemical resistant, and is a economic choice for all kinds of filtration. There are high-area pleated and may provide reliable, economical and efficient particle removal.

 

Type： Pleated Membrane Filter Cartridge

Filter Media： Nylon 6 membrane

Temperature： Up to 50°C

0.1、0.22、0.45、1.0、3.0

♦ Food & Beverage ♦ Process Water ♦ Pharmaceutical ♦ Specially Chemicals

♦ Bottled water ♦ Solvents

 

Sunrise HNUP sterilizing grade filter cartridges feature high-strength pure Nylon 66 membranes for higher assurance of sterilization. These filters have a proven record of performance in the production of sterile biological、pharmaceuticals、food and beverage.

 

Type： Pleated Membrane Filter Cartridge

Filter Media： Nylon 66 membrane

Temperature： Up to 80°C

0.1、0.22、0.45、1.0、3.0

♦ Specially Chemicals ♦ WineBeer ♦ Electronic ♦ Pharmaceutical ♦ Beer

♦ Solvents ♦ ProcessWaterBeer ♦ Bottled water

 

♦ Filter Medium： PP、PTFE 

♦ Outer protection cage： Polypropylene

♦ Nominal Length： 4.6 in (117mm) 

♦ Diameter： 2.8 in (72mm)

♦ Inlet/Outlet： 1/4 NPT

♦ Vent, Drain： 1/8 NPT

 

♦ Filter Medium： PP、PTFE、PES、N66

♦ Outer protection catge： PP

Dimensions： 

♦ Nominal Length： 5.4 in (138mm)

♦ Diameter： 2.6 in (65mm)

Connections： 

♦ Inlet/Outlet： 1/4 to 3/8 in (6-9mm)

  Stepped Hose Barb

♦ Vent, Drain： 1/8" swage

                                                                                                  回上層

♦ Filter Medim： PP、PTFE、PES、N66

♦ Outer protection cage： PP

♦ Nominal Length： 5.4 in (91mm

♦ Diameter： 2.6 in (65mm)

♦ Inlet/Outlet： 1/4 to 3/8 in (6-9mm)

  Stepped Hose Barb

♦ Vent, Drain： 1/8 NPT

 

♦ Filter Medium： PP、PTFE

♦ Outer protection cage： Polypropylene

♦ Nominal Length： 4.51 in (114.5mm)

♦ Diameter： 2.7 in (69mm)

♦ Inlet/Outlet： 1/4" swage

♦ Vent, Drain：

  UPTR5： 1/8" swage

  UPTR4： 1/4" swage

 

♦ Filter Medium： PP、PTFE

♦ Outer protection cage： PP

♦ Nominal Length： 6.8 in (173mm)

♦ Diameter： 2.8 in (72mm)

♦ Inlet/Outlet： 3/8" swage

♦ Vent/Drain： 1/4" swage

 

♦ Filter Medium： PP、PTFE

♦ Outer protection cage： Polypropylene

♦ UPTR7**： Length： 6.5 in (165mm)

♦ UPSW9**： Length： 8.1 in (216mm)

♦ Diameter： 2.7 in (69mm)

UPTR744 / UPTR*44： Inlet/Outlet： 1/4" swage Vent, Drain： 1/4" swage

UPTR*44 / UPTR*42： Inlet/Outlet： 1/4" swage Vent, Drain： 1/8" swage

 

♦ Filter Medium： PP、PTFE

♦ Outer protection cage： Polypropylene

♦ Nominal Length： 3.2 in (82.3mm)

♦ Diameter： 2.7 in (69mm)

♦ Inlet/Outlet： 1/4" swage

♦ Vent, Drain：

  UPTR32： 1/8" swage

  UPTR34： 1/4" swage

                                                                                                 回上層